B2B Electronics

Metalworking, woodworking, cutting plastic and other materials can be done through band saw cutting. This is because a band saw, which is a versatile power tool, can be adopted or designed to carry out these activities. To carry out metal cutting, the blade of the band saw used is either a carbon steel or a bimetal. Carbon steel tool blade, the cheaper option can equally be used on mild steel to cut it, when set to the appropriate speed. As for the more expensive bimetal blades, this can be used to cut hard materials, for example stainless steel. However, making use of a bimetal band saw may be the cheaper option in the long run, if used appropriately as it often outlasts a carbon steel blade of a band saw.

To cut wood, you can make use of carbon steel tool blades on your horizontal band saw or other band saws, which it can be used for (please confirm from sales guide or manual before using it this way). Some manuals that come with band saws designed for cutting wood inform users that they can equally cut metals too. This is often true, but such are soft metals like aluminum, copper, et al.

If you attempt this wood cutting band saw on a stainless steel, which is a denser metal, you will likely destroy the saw blade as a result of the heat generated. This is because a lot of wood cutting band saws possess blade speed that is inappropriate for cutting such metals; as they run faster than required for cutting harder metals.

A tooth pattern on band saws is another way these powerful tools are put to different uses for wood cutting or metal cutting. Without these differences in pattern the versatility of band saw cutting will be somewhat limited in its usage compared to what it can currently achieve.

There are general rules for tooth patterns. For band saws designed to cut wood, it is that fewer teeth per inch makes a faster, but rougher cut; while the direct opposite (possessing more teeth in every inch) will make a smoother, but then slower cut. And with metal cutting band saws, the general pattern rule is that working with thinner materials requires possessing more teeth per inch, while harder materials need fewer teeth.

Metal band saw cutting is done basically through the use of two machines, namely; horizontal band saw mentioned earlier in preceding paragraphs and vertical band saw. Wood cutting also employs the horizontal and vertical model of band saw machines. Horizontal band saw machines are often designed to accommodate one width blades, while vertical band saws can take blades that have various width sizes. Band saw cutting has developed over the years with more innovations expected in years to come.

Article Source: http://EzineArticles.com/?expert=John_F_Howard
Article Source: http://EzineArticles.com/4035828

Ektron Tek Co., Ltd. is a rubber testing instrument company with a professional research and maintenance team with over 20 years of experience and technology. It has marketed its products worldwide with its own brand EKTRON TEK. Owing to continuous efforts and innovation, we have gained the trust and compliments of world-reputed companies and have maintained the leading position in the Asian rubber testing instruments industry. Main products including rheometers, tensile testers, automatic ozone test chambers, fatigue failure testers, and etc…

Technological research and development often decides the future development of the high technology industry. Since its inception, Ektron Tek has applied continuously to the research and development of rubber testing instruments. We have made a lot of improvement to the current products and designed simple with friendly operation interface to meet customer requirements. Ektron Tek pays much attention to professional training for our technical team and to assist customers with product design and technological consultancy.

To produce precision components with consistent quality, Ektron Tek has introduced CNC equipment from Germany and implemented the strictest production flow to create an efficient working environment. Our working flow is planned and implemented according to ISO guidelines so that our products fully conform to the ISO standard. Ektron Tek has worked to ensure to deliver good products to worldwide customers.

Trigger spray bottles are one of the most commonly used spray bottles on the market currently. These trigger spray bottles are extremely straightforward to store and use and they put ready-to-use solutions right at the fingertips of the consumer. For the manufacturers of products such as domestic cleaning liquids, industrial cleaning products, and more, trigger spray bottles are perfect and help with the sales of their products, especially because this type of bottle is popular with consumers.

Trigger sprays are used for many purposes and a wide range of different cleaning products, pesticides and beauty care products are packaged in bottles with trigger sprays. The trigger spray manufacturer has to keep abreast of current market trends and innovate according to specific customer needs. One customer may want a low actuation force while another may require a higher actuation force. Some customers may want a misting option or a more targeted jet. The trigger spray manufacturer may have to put in research and come up with sprays that suit the customers’ specific requirements. Trigger spray manufacturers have to make sure that the sprays work according the client’s brief and usage requirements and that is why trigger spray manufacturers are very important.

Contact Living Fountain Plastic Ind. Co., Ltd. regarding your trigger sprays inquiry!

Although these are great wall coverings, they can be expensive — and messy to install and remove. However, there is a solution: PVC wall panels.

PVC wall panels can be a great solution if you want to cover your bare walls quickly and easily — and have them look stylish, too. They’re available in just about any kind of “look” you want, from granite-look to woodgrain, even marble or onyx.

PVC stands for polyvinyl chloride, and is a plastic paneling solution that’s been molded to specific needs. It has several advantages over real woodgrain paneling, for example, or other wall coverings. PVC wall panel includes the following features:

Durability

Unlike real wood coverings or other natural materials, PVC wall panels are durable and very low maintenance. They resist fading and color changes, and unlike wood paneling, for example, they won’t absorb water or rot.

Ease of installation

PVC panels are easy to install. Most PVC paneling today is done as a “tongue in groove” setup, such that they can simply be stapled or nailed through recessed fastening so that the fasteners are concealed. You can also glue PVC wall panels onto walls instead of stapling or nailing. The paneling is lightweight and easy to handle, so that you don’t need special tools.

Variety

You can find PVC panels in just about any color, style, or look you want. That means you can fit wall paneling to just about any decor.

Easy maintenance

Unlike other wall coverings, you don’t have to do anything special to clean or maintain PVC panels. All you have to do is wipe them down with a damp cloth.

Insulation

It might surprise you to know that PVC wall panels are very insulating, too. This can provide a sort of extra insulation for your home beyond that you would normally think of.

Flame resistant

PVC wall panels have the highest fire rating for any interior finish, further ensuring the safety of your family.

Inexpensive

Although you’ll pay a little bit out of pocket for PVC wall paneling, the savings over time as opposed to other wall covering materials is significant. Because they’re very low maintenance, durable, fire resistant, and easy to clean, you can put them up once and enjoy them for years to come, with no muss, no fuss.

Easily changeable

Want to change the look in a room quickly? Instead of having to scrape and repaper (or repaint) a room every time you want a new look, you can simply take down wall panels and put new ones back up, quickly. It’s an easy way to change a look in a room, quickly and easily — no messy paint or paper scraping to deal with.

From conception to execution, the NUFORM™ team of dedicated professionals is ready to assist with all your project requirements. In addition to providing innovative building products and solutions, we are pleased to offer the following services

Each project is converted to the CONFORM™ system in our in-house design department. Once the preliminary plans are approved by the client and/or architect it is sent to our production department for manufacturing. More experienced users can use our free CFD for AutoCAD design tool to layout and quote their own projects.

Visit FRP Panels for more insight.

Article Source: http://EzineArticles.com/?expert=Ryan_Lasley
Article Source: http://EzineArticles.com/5830618

What are Plastic Extruders?
Plastic extruders are used to create a wide range of items, including plastic tubing, trims, seals, plastic sheets and rods. Extruder is the machine for producing more or less continuous lengths of plastic sections out of a selected type of plastic resin. There are a number of extrusion techniques available such as co-extrusion, offset extrusion, oriented extrusion, overcoat extrusion, cold extrusion, ram extrusion and much more.

The essential elements for a thermoplastic extruder are a tubular barrel, usually electrically heated; a revolving screw, ram or plunger within the barrel; a hopper at one end from which the material to be extruded is fed to the screw, ram or plunger; a die at the opposite end for shaping the extruded mass.

Extruders may be divided into three general types:

* Single Screw Extruder

* Twin or Multiple Screw Extruders

* Ram Extruder

Single screw extruders and twin screw extruders are the most widely used extruders. The screw that is used to push the resin out of the die is the important component of a screw extruder. In the earlier days rubber screw were used but the rubber screw was not able to give enough amount of shear into the polymer. Therefore, screws were designed that would start deeper in the feed and gradually taper shallower in the metering section to apply more work on the polymer as it was going from the feed to the discharge.

Basic screw design
The screw is usually contained inside a tight fitting barrel driven by a variable speed motor and gearbox. It is a highly efficient device capable of processing several tons of plastic per hour, even in modestly sized extruders. The screw is divided into three division the feed section, the compressor and the metering section.

The feed section of the screw mechanism stores and delivers resin pellets from a gravity fed hopper into the jacketed screw to begin the plastic longitudinal movement. Screw threads move the plastic using axial rotation. Within the barrel, heaters help the plastic develop a tack to increase its friction against the barrel wall. Without this friction the plastic could not be conveyed forward and would merely rotate inside the screw.

In the transition or melt stage, the root diameter of the screw increases while the height of the flight decreases. The resin is melted here because of compression, shearing and heating produced in the barrel. Now the melt moves to the metering section, where the screw diameter remains constant. The melted plastic which is under high pressure now is pumped into the extruder die.

Barrier Screws
The resin is sometimes not completely melted in the basic extrusion screw. The barrier screw in designed to counter this problem. Additional flights are attached to the transition section so as to separate molten and solid plastic to different channels. As the solid pellet moves forward it melts due to shear against the wall and thus melts and flows into the liquid channel. Thus the solid channel narrow gradually and the liquid channel widens.

Mixing Screws
When mixing two different additives, a more efficient way is to mix extrusion materials with twin screw extruder. In this method two screw rotate with or against each other and have special mixing features, such as kneading blocks and forward and reverse capabilities. Some single screw systems can, however, be used for mixing.

Though general-purpose screws are available, different plastics require differently calibrated extrusion screws. The length-to-diameter ratio, pitch, length of each zone and helix angles of a screw must all be matched to the plastic type being used. The screw must also be designed to suit a specific type of die.

Extrusion screw design has been improving over the years, with new innovations and ideas that help in perpetually adjusting the process so as to meet the needs of specific applications.

For more information on plastic extruder, extrusion process, extrusion materials and machines visit: Plastic Extruders

To get more information on plastic extruder types, visit: Types of Plastic Extruders

Article Source: http://EzineArticles.com/?expert=Rajni_Sharma
Article Source: http://EzineArticles.com/4121360

The company was founded in 1974 under the name Ying Fang Hardware Manufacturing Co., Ltd., mainly produced handbag hardware accessories such as eyelets, grommets, rivets, corner protector, handle, cam buckle, belt buckle, metal chain, magnetic button, handbag frame, carabiner aluminum hook, zinc hook, turn lock, snap fastener, loop, ring and metal plate in the early stages.

In 1994,we set up a new plastic injection factory named Shin Fang Plastic Industrial Co., Ltd. which mainly produces cart system, side wheel, side release buckle, hook, loop, ring, ladder lock, cam buckle, slide, cord lock, stud, washer, eyelet, shoulder pad, foot stand, pad, strip, handle, bottom case, two colors molding product, diving case, utility box, tackle box, snap fastener, storage and container fittings, bicycle buckle, sprocket, and wheel whose are made of a wide plastic material of POM, NYLON, PP, ABS, PVC, HYTREAL, TPR, and others.

Welcome to check out more handbag hardware accessories with us.

We also offer the customized OEM/ODM service and handbag hardware accessory to satisfy the best quality, minimum cost, and quick response requirement.

Pantyhose are body-hugging legwear that provide coverage from the waist to the feet. They are generally worn by women but can also be worn by men. They were developed by Allen Grant Sr. and became available to the open market in 1959.

Pantyhose are usually made of nylon. Those that are made with a combination of nylon and spandex are more stretchable and comfortable to wear. Denier is the unit of measure for the linear mass density of fibers. Depending on their denier count, some pantyhose are sheer while others are more opaque. Pantyhose with lower denier count are more translucent and delicate. On the other hand, pantyhose that are thicker have a higher denier count.

This type of legwear both has aesthetic, protective and therapeutic purposes. Pantyhose make your legs look more attractive and they effectively conceal skin imperfections such as scars, wounds, discoloration, varicose veins, bruises and other blemishes. They aid in protecting your soles by minimizing chafing between your feet and your shoes. If you injured your legs, wearing pantyhose helps safeguard the affected area. When it’s snowing outside, pantyhose will also keep your legs warm and prevent frostbite.

Pantyhose come in many sizes. Whether you’re petite, tall or full-figured, there’s hosiery for everybody. Choose the pair of pantyhose that best fits you basing on your height and weight. To ensure you have the correct one, carefully inspect the size chart found on the back of the packaging. Because different brands have different sizes, always double check your measurements.

There are also numerous pantyhose styles that are available. You can select from a wide range of fabrics and colors. Sheer, neutral-colored pantyhose in blacks, grays and nudes are ideal for office wear. Thick, vibrant-hued hosiery in blues, yellows and reds are suitable for casual days.

In addition, you have several pantyhose designs to choose from. Plain, unembellished ones are best for formal occasions while fun, patterned styles are great for everyday use. For a girly look, you can opt for lace pantyhose. If you want to add texture to your outfit, try wearing fishnets under your dresses.

Pantyhose are very inexpensive undergarments. You can buy them in most department stores and online shops. Bear in mind to always go for quality over quantity. A $25 pair of well-made pantyhose is a better investment than countless cheap $5 hosiery with inferior quality.

This type of legwear can be worn to elegant affairs as well as to informal, laid-back events. They are great outfit toppers and make you look refined and classy. Pantyhose are also perfect to wear to job interviews, business meetings and conferences. On the weekends, you can don them under basic skirts and simple dresses.

Pantyhose are fragile garments and should be handled with care. To avoid them from getting damaged, only wash them by hand. Lay them flat to dry and remember to store them separately from your other clothes. A draw string bag is the best container for these items. Keep them away from materials that can harm them like zippers, buttons, beads, sequins and other embellishments.

Memoi is another shapewear and legwear company that provides pantyhose products online that caters United States market and will be expanding world wide. Visit us at http://memoi.com and view more of their products.

Article Source: http://EzineArticles.com/?expert=Jason_Rosas_Itumay
Article Source: http://EzineArticles.com/7817450

Whenever you’re at the groceries, do you stop and think about how perfectly measured every package is? Every bottle, every sachet, their contents are precisely measured and equally distributed; that six-pack of beer, the different lotion bottles, the different perfume brands, shampoos, cooking oil. Have you ever wondered how they are perfectly measured?

Enter the dispensing pump. This pump works by moving precise volumes of liquid, exactly timed, releasing an exact and steady flow rate or pressure. It is also called metering since the flow rate of the liquids can be adjusted. This pump is used to pump water but now it is also used to precisely pump different and sensitive chemicals and solutions into their containers.

Different solutions require varying volume, flow speed, time measurements, and pumps. One wrong move and calculation can result in disaster. That is why companies hire engineers and designers to oversee the factory operations in order to correctly compute and ensure the quality of their liquid products.

Here are a few industries that need precise liquid dispensing pump in order to guarantee equal measurements for every container:

Chemicals

Adhesive chemicals like glue, sealants, and epoxies have a very thick composition. The pumps need to dispense these solutions at a very low speed so they won’t splatter all over the place (and sticky situations).

Silicone, on the other hand, need to be carefully applied to different kinds of electronics. That is why different yet precise pumping measurements are needed in order to fill the thermosetting silicone gel without destroying your expensive gadgets.

Medicine

It turns out that dispensing pumps are also needed to create the various medicines that can save lives. Laboratories use pharma pumps to dispense such delicate solutions safely into their pills and bottles and prevent contamination.

Liquid medicine need to be carefully planted into vials, syringes, and ampoules equally and precisely since a small variation in the dosage can lead to potential harm.

Applying additive agents to first aid sanitary products are no joke either. Gauzes and bandages need a specific amount of these sanitizing agents to warrant a perfectly clean product.

Cosmetics and Toiletries

Hibar pumps are utilized to fill lotions and creams into bottles you can buy or those small sample packets you can try out for free. Makeup such as eyeliners and foundation creams also employ this technology in order to give you that accurate shade you desire.

Food

We love sauce on our food. May it be ketchup, barbecue, hot peppers or chili, soy sauce, whatever condiment you can think of use hibar pumps to provide you the extra oomph on your meals. Different oils also use these pumps as their composition might change if handled incorrectly and become contaminated.

Article Source: http://EzineArticles.com/?expert=Albert_D_Bau
Article Source: http://EzineArticles.com/8262203

Mechanical gears play a crucial role in the history of machines. Gears are basically mechanical transmission devices which have a wide range of application in industries. A gear is a toothed shaped mechanism which may be either a wheel or a cylinder. It is a device that meshes and rotates by administering force to a toothed part of another device to produce mechanical advantage. There are many types of industrial gears of which spur gears are the most common types of gears. A spur gear is a unique gear with straight teeth and mounted parallel to the axis of rotation.

How do they work?

These gears can be connected and inter locked easily when placed next to each other. However make sure that the gears are placed in such a position that the gear wheels are on a same plane. Now when the main gear is rotated the teeth present on the main gear automatically pushes the interlocking teeth forward. As both are on parallel axles it causes the consecutive linked gear to turn and rotate in the opposite direction. As the interlocking of the teeth keeps the wheels in motion the gears continue to rotate.

Types:

Internal: The internal gear is more or less similar to the regular spur gear. They are cylindrical in appearance and the tooth is parallel to the axis. The internal spur gears have teeth that face inward. The gears are placed in such a way that they make internal contact. They are also referred to as ring gears. The output rotation created by this gear system is in the same direction as the input rotation.

External: These are the most common and popular types of spur gears. The teeth like structure are cut on the outside surface of the wheel. The large size wheel is called as the gear and the small size wheel is called as the pinion. The output rotation is in the opposite direction when compared to the input rotation. In the external spur gear system the teeth are used to provide a constant speed and rotation between two parallel shafts.

Uses:

Spur gear is used to increase or decrease the torque or power hence it is incorporated in washing machines, clothes dryer, blenders and in construction equipment. They are also used to increase or decrease the speed. As such they are put to use in mechanical clocks and egg beaters. They are also implemented in designing air craft engines.

Advantages:

They are constructed in a simple manner as the teeth are positioned in a straight position. They are easier to manufacture and does not easily cause breakage or damage. The efficiency of the spur gear is greater and it is calculated by the output power of its shaft divided by the input power of its shaft multiplied by 100. As they are easier to construct and produce they are made available at very affordable rates to the buyer.

Conclusion:

As the operations are very simple they are put to a multitude of uses in both industrial and non-industrial sectors. Spur gears are very popular in a majority of industries as they as known for their high performance and efficiency to meet the requirements of the people.

Article Source: http://EzineArticles.com/?expert=Natalie_Eastaugh
Article Source: http://EzineArticles.com/7052031

I find myself constantly getting asked the same question over and over again: “What exactly are automatic taps?” So here is the answer: they are basically taps that allow the user to operate them without ever having to touch them. whereas traditionally, the user would need to physically touch the tap in order to operate it, automatic taps require the user to simply move his or her hand close to tap. The tap then senses that the users hand is close, and then automatically switches on the flow of water. Once the user has finished and removes their hands from the tap, it senses this and automatically stops the flow of water.

As you can imagine, because the users hand never usually gets to touch an automatic taps makes them so much more hygienic than traditional manual taps. Because there is no physical contact, there can be no transfer of germs or bacteria from the users unwashed hands onto the tap itself. This makes automatic sensor tap a great addition to hygiene conscious environments such as hospitals and public washroom; as the lack of the need to touch them minimises the potential to spread germs and infectious diseases.

As well as being more hygienic, sensor taps are also nicer to look at. There are many contemporary and stylish designs available out there. You are more than likely to find a style and design that matches your taste, as well as the setting that you intend to place it into.

There are many names for them too. These include: Sensor taps, infrared taps, auto taps. Another term used to describe them is thanks to Americans who usually call them “Faucets”. So you get: Automatic faucets, Sensor faucets etc.

So as for the question about whether automatic taps are better or worse than manual taps, I guess it all comes back down to personal preference. There will always be some people out there who are and always will be die hard fans of manual taps. they prefer the certainty that comes with having to physically handle a tap. I guess these people will always prefer manual taps over automatic. They see automatic taps as simply needless gadgets that complicate an otherwise simple task. But then there will be those that absolutely love automatic taps and will wonder where they have been all of their lives. They enjoy contemporary looking objects and tend to be more gadget oriented.

So whilst I don’t think that automatic taps will mean an instant death for the modern tap, I do think that we will begin to see more and more of them. Especially in today’s modern homes.

Barry Bada is an avid user of Automatic Taps and believes that they are the future. To learn more about Sensor taps and the different types out there, Click!

Article Source: http://EzineArticles.com/?expert=Barry_Bada
Article Source: http://EzineArticles.com/6777914